©2017 by Used Equipment Planet. Proudly created with Wix.com

 
 
 
 

Equipment List

please check back frequently -- our inventory changes often

click here for equipment photo albums

Consignment

 

Dodge Truck, 1992, D3500, with 271,000 miles, rear wheel drive
$8,950

 

Harley Davidson motorcycle, 2013, Ultra Limited, only 800 miles
$20,500

 

Suzuki motorcycle, 650V, Road Racer
$4,650

 

Harley Davidson motorcycle, Road King, 5,000 miles
$8,950

 

Ford tractor, 3000, gas
$3,500

 

Ford tractor, 250c diesel
$7,950

 

Kubota tractor, B2200, mower/snow blower  
$9,500

 

Farm attachments starting at  
$300

 

Ford Front End Loader, Diesel, runs, but needs head gasket
$5,000

Miller Syncrowave 300 Welder, 
$2,500

 

Reid 6 x 18 Surface grinder 
$995

Coil Handling Equipment

 

Littell No. 5 Single End Auto Centering Reels, 600 lb. capacity, 15”-20” ID, 48” maximum OD, 10” maximum width, manual expansion, spring tension brake. (Tag #4 & # 9)

2 Available: $500 each

Littell No. 10 RSI & No. 10 RS-52 Single End Motorized Auto Centering Reels, 1000 lb. capacity, 12”- 20” ID, 48” maximum OD, 12” maximum width, manual expansion, ½ HP motor. (Tag #3 & #7)

2 Available: $750 each

 

Littell #40-18, Single End Motorized Coil Reel, 4,000 lb. capacity, 16”- 20” ID, 48” maximum OD, 18” maximum width, manual expansion, electric brake. (Tag #1)

$3,950

Littell #40-18, Single End Motorized Coil Reel, 4,000 lb. capacity, 16” – 20” ID, 50” maximum OD, 18” maximum width, manual expansion, serial #80264-73, electric brake. (Tag #2)f

$3,950

 

Littell #40-12, Single End Motorized Coil Reel, 4,000 lb. capacity, 16” – 20” ID, 60” maximum OD, 12” maximum width, manual expansion, electric brake. (Tag #5)

$3,950

 

No. 8 Plessey Single End Motorized Uncoiler, 2,000 lb. capacity, 16” – 20” ID, 50” maximum OD, 18” maximum width, manual expansion, serial #0885-055, model PR-1-J82500-M3. (Tag #8)

$1,950

 

Littell No. 308 Continuous Straightening Machine, 8” wide, Capacity: .043 at 4” wide, Speed: 120 to 720 FPM, 50” material pass line, 3 over 4 rolls serial #44048-51.

$1,950

Conveyors

1 Conveyor is 10’ long x 12” wide, with ½ HP motor 
 $1,000

 

2 Conveyors are 8’ long x 12” wide, with ½ HP motor
$800 each

 

2 Conveyors are 6’ long x 12” wide, with ½ HP
$600
 each

Finishing Machines

Model V8 Almco Tub Type Finishing Machine, 8 cubic Ft. capacity, 7-1/2 HP variable speed drive,  sound enclosure.

$8,800

 

Model V7 Almco End Discharge Type Finishing Machines: 6.1 cubic ft. capacity, 31” x 17” tub size, new tub lining with weld baffle feature.

$6,900


Model V17DT Almco End Discharge Type Finishing Machine: 16 cubic ft. capacity, 46” x 23-1/2” x 29-5/8” Deep Tub with Sound Hood and Auto Lube, Excellent Condition

$15,700

 

Model 2SF36 Almco Spindle Type Finishing Machine:  Permits fast loading and unloading of parts. Spindle Heads automatically return to “up” position at the end of a pre-set time cycle, handles parts up to 7” diameter, with complete sound package.

$18,200 each

 

Model 2SF36RA Almco Spindle Type Finishing Machine: The same as above with the flexibility of Hydraulic Spindle positioning to present parts for Automation. Very good condition.

$26,300

Model 1SF48 Almco Spindle Type Finishing Machine Serial # 099013: Finishes up to 40 pieces per hour: diameter to 36”. The Cycle is adjustable from 0 seconds to 30 minutes. It can control Radii down to plus or minus .001 inches.  This machine has been completely rebuilt and is ready to go

$19,800

 

Model 2SF48D Almco Deep Tub Spindle Type Finishing Machine. This machine has a rotating tub with a special depth that carries the finishing media. It has two spindle supporting heads over a 48” diameter by 28” depth rotating tub. The two spindles operating independently and can deburr parts up to 17” weighing 50 lbs. Complete sound package.  Condition is like new

$28,900

 

Model 2SF48 Almco Spindle Type Finishing Machines: Centrifugal Force spins the selected finishing media into a “Form Fitting grinding wheel” while a slow rotation of the part on the spindle delivers a superior finish of complex parts. There are 6 machines available.
Price, dependent upon condition ranges from $5,400 to $15,500 for a machine in excellent condition.

 

Model CFT-2000-1 Almco/Sutton Spindle Type Finishing Machine: 30” Diameter Tank x 26” Deep, Hi-Energy, Spindle capable of processing parts up to 18” in Diameter by 4” High. Rebuilt with new tub, and bearings, excellent condition

$38,700

 

Model OR-10 Almco Round Bowl Type Finishing Machine: 9 cubic ft. working capacity. 3 Available, 1 with rotating divider system.  Excellent

$10,900 - $11,400

Model OR-20VHE Almco Round Bowl Type Finishing Machine; 20 cubic ft. working capacity, new style vari-drive system. Excellent 

$18,400


Presses

 

Federal 32 Ton Gap Press, serial #32HS-350 (1977), 2” stroke, 11” shut height, 3” ram adjustment, bed area 24” x 15”, throat depth 8”, 50 to 550 SPM, Vamco Feed, Very good condition.
$12,500

35 Ton Bliss OBI Press, model #CH-35, Serial H68670/HP52053, 26-1/2” LR x 17” FB bed area, Sterling variable speed drive, 30 to 160 SPM, 2” stroke. 2.5” adjustment, 11” shut height, air clutch and brake, air counterbalance, lube system, Vamco Press mounted feed, model TS6 “Van Mark 6” wide capacity.
$12,500

 

30 Ton Minister Pulsar, High Speed Straight Side Press, Model TR230, stroke 1-1/4”, adjustment 1.75”, bed area 21” x 30”, speed 0 to 1200 SPM (variable), independent control console, lube system, sound enclosure, floor standing, Floor pad cushions, windows, air clutch/brake & counterbalances, press mounted Vamco  coil feed model MV6
$25,900

V&O 90 Ton, OBI Press, Serial#90S42, Stroke 4”, Shut height 15”, Adjustment 4”, Slide 17” x 12”, Bed 44” x 24”, Speed 70 SPM, Air Clutch & Brake, Cushion
$7,900

 

Bliss 96 Ton OBI Press, Model #28, Serial #H526411-HP40718, 6" Stroke, 3-1/2" Adjustment, 17" Shut Height,29" X 36" Bed Area, 26 SPM (Fixed)Air Clutch Air Counterbalance Air Cushion Floor Standing Tie Bars Lubrication System

$16,500

Bliss 95 Ton, OBI Press, Model#28, Stroke 6”, Shut height 17”, Adjustment 3-1/2”, Speed 85 SPM, Bed 38” x 27”, Air Clutch & Brake
$7,950

Chicago 100 Ton Press, Model #100-36-120, Serial #P-9409, Bed & Ram Area 120” LR x 36” FB, Stroke 6”, Powered ram adjust with shut height indicator, Adjustment 5”, Shut height 12”, light curtains, two station operator controls. Air Clutch/Counterbalances, Speed 30 SPM, Windows 38” LR x 12” H, Lube system, Floor Standing  

$29,500

Aida 110 ton Gap Frame Press, Model # PC 10 (2), Serial #10110-0467, Stroke 6.6”, Speed 50 SPM, Bed 41.7” x 22”, Slide 23.6” x 17.7”, Slide to bolster 13.&”, Adjustment 2.9”, Air Clutch & Brake, 10 HP motor
$29,500

Verson 110 ton Gap Frame Press, Serial #22730, Stroke 8”, Shut height 18”, Adjustment 5”, Bed 42” x 27”, Speed 40 SPM, Air Clutch & Brake, Link logic tonnage monitor, Farval Lube System, Feed line including Tishken 2500 lb. double end uncoiler, Model HR 8D, Little model 4E feed
$24,500

USI Clearing 110 ton OBI press, 4" stroke, 60 SPM, 22 5/8" shut height, 5" adjustment
$19,500

 

Clearing 150 Ton OBI, Model 150-P-701-OBI, SN 54-5272 , 6" stroke , 5" adjustment, 35 SPM ,33" X 50" bed, Air clutch
$39,500

Verson 150 Ton SSSC, 8" stroke, 25" SH, 8" Adjustment, 36" x 36" Bed, 26 SPM, 17" LR x 15" High windows, on location, Cleveland
$12,500

Warco 350 Ton SSDC Press, serial#57-1591, 10” stroke, 24” SH, 6” adjustment, 30 SPM, 60” x 45” x 6” thick bolster, Good Condition, on location
$49,500

 

Niagara Single back Geared Gap Press, Model - M250. Capacity 250 ton 1/4" off bottom, Stroke -  8", Shut height -  22-1/2", Adjustment - 6" (powered), Speed - 35 SPM, Bed - 58" x 35", Ram - 36" x 28", Bolster - 4-1/2" Thick, Equipped with: Cushion, Trabon lube system, Approximately 181" high,
$45,900

Machine Tools

Moore Jig Grinder, Model # G18, Serial #2162, Working Surface of Table 11" x 24", Table Travel, Cross & Longitudinal 11" x 18", Main Spindle Travel 3-5/8", Distance Table Top to Wheel Collet 2" - 18", Spindle Housing Vertical Travel 12-5/8", Distance Spindle to Column Ways 10",Distance Spindle to Column Below Ways  13.5", Spindle Speeds (Infinite)  40-250 RPM, Spindle Feeds, Air Hydraulic (Infinite) 2-120 Cycles PM, Grinding Wheel Speed Range  9,000-40,000 RPM, Grinding Capacity with Wheels 1/64" - 5", Overall Height 102",Approximate Weigh 4,000 lbs 
$12,500

Fabricating

 

Cincinnati  Model #CL6 Laser Cutting System, new in 2005, model CL6, wattage 2,000, type of resonator, Fanuc, rebuilt in 2013 with 30,000 hours, now has 47,000 hours, 5’ x 10’ dual pallet shuttle tables, flying optic positioning system design, 160IL Fanuc control, Travels, x 120”, y 60”, z 8”, Koolant Kooler, 460 volt/3 ph, 23.6 amp chiller, weight 28,000 lbs.,
Dimensions 380” x 165” x 80’                                                                                                               
$89,500

 

Nisshinbo Model HIQ-1250 Hydraulic Turret Punch, serial# 98086 (8/99), 30 ton capacity, 98.4 x 49.2 max work piece, well tooled, can be seen under power, in very good condition                                                      
$24,500

 

Cincinnati 175 CBII, CNC Hydraulic Press Brake, serial#51077, 175 tons x 10’ bed, 10” stroke, 8’ 7” between housings, Link lite Black Magic lite curtains, Speeds, 180 IPM approach, 16 IPM Med, 40 IPM High, 200 IPM return, 15 HP motor, excellent condition under power                                                                                                                             
49,500

Pines ¾” NC Tube Bender, serial #11005-2466, model 110
$3,000

Tanks

 

Tank #1, approximately 12’ diameter x 20’ high, 16,000 gallon capacity
$14,900

 

Tank #2, approximately 12’ diameter x 10’ high, 7,000 gallon capacity
$6,500

Testing

Nikon model V12 Optical Comparator, Profile projector 12”, .00005” 5x, 50x, 100x lens, 12” viewing size, Nikon 7.5”- 11’ stage, Quadra Chek Digital readout, X-Y graduations .001”
$4,500

 

Starrett VB 400 Optical Comparator, Bench Top, Vertical view orientation, 16” screen diameter, 8” x 4” measuring range, focus range 4”, work stage 16” x 9”, load capacity 22 lbs., Quadra Chek 2000 digital readout.
$4,500

Washer

 

Alliance Aquamaster model cc-1800x Washer, Wash, Rinse, Blowoff and Cooling, Gas Burners rated at 400,000 BTU/HR, Currently set up for 18" wide fixtured parts x 6" high

$89,500

 

ADF Systems Washer, Serial #9603-2920, 24" plastic belt (perfect shape) Regan blowoff- 5 HP, 260 gal- electric heat 480V- 3ph Filter on washer section, Belt entrance & exit height- 42"Exhaust stack (connected to wash & blowoff sections) Machine size: overall length- 14', height- 80", width- 80",In excellent condition               
$24,900

Vapor Degreaser

 

Vapor Engineering model VDS-72A, Degreaser, 4,000 lbs. per hour, (steel or Iron) 2,000 lbs. per hour, aluminum, Trichloroethylene solvent, 30 KW heat input, 72” x 36” x 36” dimensions, model E50 Still, Rite temp RTS 753 AWD Chiller, very good condition, on location                                                                                                                
$14,500.00

Real Estate

700 Liverpool Drive, Valley City, Ohio
…Secured outdoor parking available on 15 paved acres.

 

9401 Carr Ave., Cleveland, Ohio
…Industrial Manufacturing Building, built in 1940, 91,529 Square feet, immediate occupancy
$1,050,000

 

3982 Main Street, Adamsville, PA
. …Industrial Manufacturing Building, Built 1940, 45,000 square feet, immediate occupancy
$339,000